How to unbrick Lenovo Vibe P1M Stock Rom V1

Here is a simple, safe and easy step by step tutorial to install or Unbrick Lenovo Vibe P1M Stock Rom V1 with image guide.

Hi, This is a unbrick Lenovo Vibe P1M Stock Rom V1 by Lenovo and in this post we will know how to flash stock Rom of Lenovo Vibe P1M by easy and safest method. Lenovo Vibe P1M has MediaTek Quad Core 1.3 GHz processor and a 5.0 inch screen with 480 x 854 Pixels resolution. It has 2GB RAM, 16GB storage, 8 MP Rear and 5 MP Front Camera. True color (16 M) and 5.1 Android Lollipop.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read:  How to Wipe cache and data on Android Phone

Download ROM and Tools of Lenovo Vibe P1M:

File Name Download link
Lenovo Vibe P1M Stock Rom V1 Lollipop Download
Lenovo Vibe P1M SP Tool V5.1616 Download
Lenovo Vibe P1M USB Driver Download

How to unbrick the Lenovo Vibe P1M Stock Rom V1:

Step 1: Install drivers on your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.


Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.


Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.


Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).


Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.


Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.

Must Read: Common security mistakes done by Android phone users

I hope you like this Unbrick the Lenovo Vibe P1M Stock Rom V1 installation guide from which you will be able to easily Unbrick Lenovo Vibe P1M Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.


  1. Big thumbs up to the writer of this piece men! That Lenovo firmware is truly authentic, because I had flashed others that didn’t work right. That is, they did boot, make the booting sound and all, but my screen stopped displaying. Maybe they just were meant for other variants of Lenovo Vibe P1m other than mine. But flashing the one above using SP Flash Tool was what solved it for me, bringing my phone’s screen back to life.

    Thank you very, very much!

  2. my device does not get out of the recovery mode .. keeps on going to recovery mode .. i cant do the USB debugging or any of the inside phone functions .. what do i do now ?

Leave a Reply

Thanks to leave a comment. Please note that all comments are moderated according to our comment policy and your email address will NOT be published. Please Do NOT use keywords in the name field. Lets have a meaningful conversation.