How to install Micromax Bolt A068 Stock Rom v1

Hi, This is Micromax Bolt A068 Stock Rom v1 by Micromax and in this post we will know how to flash stock Rom of A068 Bolt by easy and safest method.

Micromax Bolt A068 has MediaTek dual Core 1.0 GHz processor and a 5.0 inch screen with 480 x 854 Pixels resolution. It has 512MB RAM, 4GB storage, 5 MP Rear and VGA Front Camera. True color (16 M) and 4.2.2 Android Jelly bean.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.
4. Read all steps then do it careful.

Must Read: OGWhatsApp: Trick to run WhatsApp on Dual numbers on Android

Download ROM and Tools of Micromax Bolt A068:

Steps to install Micromax Bolt A068 Stock Rom v1:

Step 1: Install drivers in your PC (If you feel any problem in install driver and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Step 2: Extract the Stock ROM folder where you want then Extract and open the SP Tool. and run Sptool.exe Run as Administrator

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. You will find this scatter file in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt”. See in this image.

Step 4: Now You will see two options for flashing Rom, first is “firmware upgrade” option which is used to update or flash your Rom without deleting your data and second one is “Download” option this is work for format your phone then flash Stock Rom ( like fresh Rom installation). So choose according to your requirement and I suggest, click on the “Download” option and flash fresh Rom on your phone.

Step 5: Now connect your switch off phone to the PC via USB cable (Make sure your phone is switched off). SP Tool detect your phone and process will start. See in below image. If Sptool is not recognize or detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it)

Step 6: Now Sptool start downloading Stock Rom in your phone by flashing.

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 7: After the process complete, a green ring will appear.

Step 8: Disconnect your phone. Now your phone is updated.

Must Read: Solutions for some common Problems of Android Smartphones

I hope you like this Micromax Bolt Stock Rom v1 guide from which you will be able to easily install your Micromax Bolt Stock Rom v1 on your phone without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.