How to unbrick Karbonn Titanium Machfive Stock Rom V1

Here is a simple, safe and easy tutorial to install or unbrick Karbonn Titanium Machfive Stock Rom V1 with image guide.

Hi, This is an approved official Android 4.4.2 KitKat Stock Rom V1 of Karbonn Titanium Machfive and this is a easy and safe guide to install or unbrick Karbonn Titanium Machfive Stock Rom V1. Follow this guide to update or flash your phone with Android 4.4.2 KitKat Stock Rom V06.

Karbonn Titanium Machfive comes with 5.0 inch HD display which provides 720 x 1280 pixels resolution with Mali-400 MP2 GPU. Karbonn Titanium Machfive has two outstanding features CMOS image sensor and MediaTek MT6582 chipset with 16M colors, it’s make this phone very smoother and faster. If we talk on gaming of this phone then we find Karbonn Titanium Machfive performed very well.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: How to write notes during the phone call with Call Writer

Download ROM and Tools of Karbonn Titanium Machfive :

File Name Download link
Karbonn Titanium Machfive Stock Rom V1 Download
Karbonn Titanium Machfive SP Tool V5.1616 Download
Karbonn Titanium Machfive USB Driver Download

How to install or unbrick Karbonn Titanium Machfive Stock Rom V1:

Step 1: Install drivers on your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.


Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.


Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.


Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).


Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.


Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.

Must Read: Why should buy chinese smartphone

I hope you like this unbrick Titanium Machfive Stock Rom V1 installation guide from which you will be able to easily unbrick the Karbonn Titanium Machfive Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

One Comment

  1. Hey i do just like u already on karbonn sparkle v with its Official rom
    Every thing successful but phone not turn on
    Plz reply

Leave a Reply

Thanks to leave a comment. Please note that all comments are moderated according to our comment policy and your email address will NOT be published. Please Do NOT use keywords in the name field. Lets have a meaningful conversation.