How to unbrick Cubot X16 Stock Rom V04

A simple, safe and easy tutorial to install or unbrick Cubot X16 Stock Rom V04 with image guide. Official Android 5.1 Lollipop Stock Rom V04.

Hi, This is an approved official Android 5.1 Lollipop Stock Rom V04 of Cubot X16 and this is a easy and safe guide to install or unbrick Cubot X16 Stock Rom V04. Follow this guide to update or flash your phone with Android 5.1 Lollipop Stock Rom V04.

Cubot X16 comes with 5.0 inch HD display which provides 1080 x 1920 pixels resolution with Mali-T720 GPU. Cubot X16 has two outstanding features CMOS image sensor and MediaTek MTK6735A chipset with 16M colors, it’s make this phone very smoother and faster. If we talk on gaming of this phone then we find Cubot X16 performed very well.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: How to fix overheating problem of Smartphone

Download ROM and Tools of Cubot X16 :

File Name Download link
Cubot X16 Stock Rom V04 Download
Cubot X16 SP Tool V5.1616 Download
Cubot X16 USB Driver Download

How to install or unbrick the Cubot X16 Stock Rom V04:

Step 1: Install drivers on your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.


Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.


Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.


Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).


Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.


Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.

Must Read: How to Watch and Remove your Facebook Search History

I hope you like this unbrick the Cubot X16 Stock Rom V04 installation guide from which you will be able to easily unbrick Cubot X16 Stock Rom V04 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Leave a Reply

Thanks to leave a comment. Please note that all comments are moderated according to our comment policy and your email address will NOT be published. Please Do NOT use keywords in the name field. Lets have a meaningful conversation.