How to install Micromax Q345 Canvas Selfie Lens Stock Rom V1

Hi this first approved ROM of Micromax Q345 Canvas Selfie Lens Stock Rom V1 and here is a easy and safe tutorial of this update processes. It is Stock Rom V1 of Micromax Q345. Canvas Selfie lens comes with a 8 megapixel camera, 5 megapixel secondary cameras and runs an quad-core chipset clocked at 1.3GHz. This is MediaTek MT6582 processor chipset. Canvas selfie lens comes with 1 GB RAM, 4 GB Rom and 5-inch full HD and 2800 mAh Battery. After reading this article you will be able to get the answer of your question how to install first stock rom 5.0.1 lollipop on Micromax Q345 Canvas Selfie Lens.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: How to swap internal storage with the SD card in Android device

Download ROM and Tools of Micromax Q345 Canvas Selfie Lens:

How to install of Micromax Q345 Canvas Selfie Lens Stock Rom V1 :

Step 1: Install drivers on your PC  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this click here). After then switch off your phone.

Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.

Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Step 4: Now Select firmware upgrade from dropdown menu then click on Download. And Connect your switch off phone with The PC via USB cable  (Make sure your phone is switched off).

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver connect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.

Must Read: Best apps to watch movies & videos online on Android and iPhone

After install new update of Micromax A107 Canvas Fire 4, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article, then here is a root guide: How to root Micromax Q345 Canvas Selfie Lens without PC.

I hope you like this Micromax Q345 Canvas Selfie Lens Stock Rom V1 installation guide from which you will be able to easily install Micromax Q345 Canvas Selfie Lens Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.